The AirCon-2 sampler is a high volume unit with an extended flow range, designed for collecting particulate in a given plant area. It is ideal for asbestos background and clearance sampling, following NIOSH, OSHA, or EPA methodology, and for ambient dust monitoring. The AirCon-2 System is available in a programmable version that operates off either AC or battery power. It comes with an adjustable tripod mast and connecting hose to hold the filter cassette at the proper height and isolate the filter from the vibration of the unit. The cassette
and filter media must be ordered separately. All Samplers are warranted for one full year. Programmable AirCon-2 Sampler. The touchpad and LCD display on the front of this DC powered unit allows the user to program as many as three custom timing routines for unattended sampling
up to 99 hours. The program feature can be used to control starts and stops to the sampling run, as well as delays, holds, and number of cycles.
Programmable units include an instant fault function.
When the unit is operated out of its performance
envelope, the AirCon-2 sampler will terminate the
sampling run and lock in the time. A flashing word
‘FAULT’ appears on the display to alert the operator.
Back pressure load on the unit can be checked through
the LCD display at any time simply by pressing a button on the front control panel.

PRODUCT SPECIFICATIONS
PERFORMANCE
Flow Range ..................... 2-30 LPM
]
Constant Flow ................. 2-30 LPM @ pressures up to 7 psi
Run Time ........................ 8 hour minimum
ENVIRONMENTAL
Temperature Ranges
Operating ..................... -4°F to 113°F (-20°C to 45°C)
Storage ........................ -40°F to 113°F (-40°C to 45°C)
Humidity Range
Humidity Range ........... 0-95 %RH, non-condensing
GENERAL
Display ........................... Electronic Pressure Display, Full-
Function Timing Program,
Instant-Fault Function,
Programmable Memory
(up to 3 custom programs)
Keypad ........................... ACCEPT, PROG, TIME/PRESS,
RUN/HOLD
Controls .......................... Flow Adjust
Indicators ........................ LCD Display, External Rotameter,
Instant Fault, Low Battery
Dimensions ..................... 4.3W x 0.3H x 7.5D inches
10.8W x 26.0H x 19.1D cm
Weight ............................ Main Unit: 12 lbs (5.4 kg),
4-Hour Battery Pack: 11.5 lbs (5.2 kg)
Power Module: 2 lbs (0.9 kg)
ELECTRICAL
Main Unit Input ............... 12 VDC @ 3.4 A
Power Module Input ........ 115-230 VAC @ 800/600 mA,
50-63 Hz
Power Module Output ...... 14 VDC @ 4.6 A (51 watts)
Battery Pack Output ........ 12 VDC, 13 AH
Fuses ............................. 250 VAC, 3 amp, fast acting,
250 VAC, 1.6 amp, fast acting
Charging Time ................ 14 hours (operational),
8 hours (non-operational)