Gas Cooler SGC-2000 is used to remove water in the gas. It is consisted of cooler, temperature sensor , temperature controller, power supply, sample gas in/out port and filter. The front panel of the gas cooler have the display of temperature controller, cooler operating lamp of the cooler and select switch. The select switch allows the user to confirm the current temperature of sample in gas, cooler and sample gas passed cooling pot.
The carrying handle and filer are attached on the top of the gas cooler. The filter remove the particle in the sample gas and protect the cooler is filled with water. The cooler is controlled by the setting temperature. After the early stage of stability , the temperature is adjusted within ±0.5 ¡É and the method of control is formed by the amount of electric current. The user can configure that start and stop temperature of the cooler optionally. During the cooler is operating, the lamp turn on green.